We specialize in the contract tube cutting of all workable alloys including stainless steel hypodermic tubing (hypo tube), exotics, brass & copper. Our multi-stage fabrication process eliminates waste, and most end forming can be done during the tube cut-off process. Custom-made, reusable stainless steel needle tubes / cannulas formed to your specifications.
Four Slide Products provided accurate delivery information not only in the quoting stage but through the production phase.
Duane D. Riha,
Legacy Technologies, Inc.
We source and cut standard, custom & half-gauge hypodermic tubes. We also manufacture needle blanks from standard gauge stainless steel hypodermic tubing (gauges 3 to 24) and custom gauge tubing, as needed, for specific configurations. Lengths range from 0.020″ to 18″, with tolerances to ±0.001″. Square cut edges with no material loss, and little OD/ID distortion. Simultaneous flaring, bulging, punching, bending, and more, can be accomplished during the tube cutting process with no scrap or waste between cut parts.Let's Get Started!
Stainless steel cut tubular components for hypodermic needles, reusable needles, injection and transfer (blunt) needles and custom needle cannulas. Our high volume production process for hypodermic blanks yields uniform parts with square cut ends and little OD/ID distortion, ready for Luer Lock fittings, grinding, or additional machining.Let's Get Started!
Custom cannula tubing cut-to-length, in tube gauges 3 to 24, with custom and half gauge tube sizes available upon request. Lengths range from 0.020″ to 18″, with tolerances to ±0.001″. Square cut edges with no material loss, no OD or ID distortion. Simultaneous flare, bulge, outside radius, punching, bending and more.Let's Get Started!
Custom needle tubes (hypo tubes) are cut from standard gauge stainless steel hypodermic tubing (3GA to 24GA) with custom sizes available upon request. High volume, precision-cut tubular components are fabricated to your specifications, including most end forming and finishing. Production runs are scalable from hundreds to billions of parts.Let's Get Started!
Stainless steel tubular part fabrication for optical (fiberoptic) applications. Standard hypodermic tubing may run undersized when used to fabricate fiber optic components. We fabricate precision tubular components to your specifications, using custom or standard sized tubing as needed.Let's Get Started!
Contract tube cutting of all workable alloys including exotics, brass & copper for formed tubular parts. Most end configurations can be achieved simultaneously. Tubular parts are bent without kinking with little distortion and no collapse on the outside or inside diameters. Custom tooling is also available.