We manufacture small precision-cut tubes with bending, and end forming integrated into the fabrication process. We bend any workable alloy, sized 0.020″ to 0.375″, with single radius bends as tight as 3Xs the center line radius, cut to tight tolerances of ± 0.001″ with little OD/ID distortion, square cut edges, and minimal ovality in the bend area.
Four Slide Products provided accurate delivery information not only in the quoting stage but through the production phase.
Duane D. Riha,
Legacy Technologies, Inc.
We cut, bend, and end-form most small tubular parts in one fabrication process, using our custom tube shear cutting machines. We source all standard tube sizes and hypodermic tube gauges, and we’re able to source custom tube sizes upon request. We cut and end form all workable alloys including exotic metals.
Let's Get Started!You can submit drawings for a quote or contact us about your project needs or call us now at 610-746-0688
We design and manufacture custom hand operated bending fixtures for small runs of tube with diameters of .020 to 3/8″.
Let's Get Started!You can submit drawings for a quote or contact us about your project needs or call us now at 610-746-0688
Roll bending can be integrated into our multi-stage tubular part fabrication process, which reduces set up and tooling costs compared to other processes, such as CNC tube bending. For small tubes and hypodermic tubing, we’re able to achieve single radius bends as tight as 3 times the center line radius for tubes sized from 0.020″ to 3/8″ OD. Tubing is bent around different sized rollers, with the outside of each tube fully supported to minimize ovality.
Let's Get Started!You can submit drawings for a quote or contact us about your project needs or call us now at 610-746-0688
We specialize in contract tube cutting of all workable alloys including stainless steel hypodermic tubing (hypotube), exotics, brass & copper. We shear cut tubular parts with no scrap or material loss between cuts. Most end forming & machining can also be accomplished during the tube cut-off process.
Let's Get Started!You can submit drawings for a quote or contact us about your project needs or call us now at 610-746-0688
Contract tube cutting of all workable alloys including exotics, brass & copper for formed tubular parts. Most end configurations can be achieved simultaneously. Tubular parts are bent without kinking, little distortion and no collapse on the outside or inside diameters. Custom tooling is also available.